All Products

YB Photonics’s DVS/DAS integrated optical module highly integrates inside our own proprietary ultra-narrow linewidth laser, pulsed EDFA, Raman amplifier, AOM and other optical components in single compact package.

DVS/DAS Integrated Optical Module

Data Acquisition Card for Distributed Acoustic Fiber Sensing (DAS) with Pulse Output sends TTL pulses directly to the AOM driver, eliminating the need for an additional pulse generator and greatly reducing system complexity.

Cost-Effective DAQ Boards For Distributed Acoustic Sensor DAS

1550nm Ultra-narrow Linewidth Single-Frequency Laser module,Compact module size, narrow line width (<3k), 20mW output power, high stability, ideal for device integration, distributed fiber DAS, DVS systems.

1550nm Ultra-narrow Linewidth Single-Frequency Laser module

GY-DAQA-2510 is a high-performance DAS dedicated data acquisition card, with dual-channel 1GSps synchronous trigger sampling, and comes with AWG function, which can generate 2-channel swept signal output for chirp pulse modulation.

1G with Capture Card + Arbitrary Signal Generator (AWG) Integration Board for Chirp DAS.

The UNL-C-F-M-C34-13-7-1-0-0 is a narrow linewidth 1550nm laser module from YB Photonics. It features an ultra-narrow linewidth (<3kHz) making it ideal for distributed fiber optic sensing systems(DVS/DAS) and wind radar.

ultra-narrow linewidth laser 3k 1550nm

DTS-ETH-250M-2 is a special data acquisition card for DTS of distributed fiber optic temperature measurement system, which adopts Gigabit Ethernet port for data transmission and built-in averaging function with very high signal-to-noise ratio. Each channel supports a maximum of 32768 points acquisition, averaging up to 65536 times, 250M sampling rate, spatial resolution of 0.4 meters.

250MSps DAQ Board for Raman DTS Gigabit Ethernet port UDP protocol

The DAQ board, which can be set up to 1G sample rate and has built-in trigger output and input interfaces, can be used for applications such as DAS distributed acoustic sensing system with 200M AOM acquisition or LIDAR.

1GSps dual-channel high-speed data acquisition card

This is a data acquisition card for distributed fiber optic vibration monitoring system (DVS) with built-in TTL pulse signal trigger output function to provide signal to the AOM driver, saving extra signal generator (AWG) and reducing the integration difficulty and complexity of the system.

100MSps high speed DAQ card for DVS

Enhanced DAS all-in-one is capable of real-time demodulation of the phase of the entire fiber optic cable, TCP protocol output of vibration signals, and coherent attenuation suppression, enabling the output of purer signals than general-purpose DAS all-in-one.

Enhanced DAS hardware all-in-one TCP protocol direct vibration signal output

Universal DAS Hardware All-in-One

The high-performance chirped DAS all-in-one adopts the chirped pulse demodulation scheme to realize and do the coherent fading suppression, which greatly improves the spatial resolution (2m), more sensitive, and higher signal-to-noise ratio.

High Performance DAS Hardware All-in-One Chirped Pulse Demodulation 2 meter spatial resolution

Distributed Fiber Optic Temperature Measurement Mainframe

The APD modules are based on low-noise avalanche photodiodes made of InGaAs with a built-in pre-amplifier and high voltage supply.A temperature compensation function allows the APD to be operated at constant gain across a wide operating temperature range.

Dual Port APD Receiver Module For Raman DTS

GY-FBG series fiber grating demodulator module can be matched with various fiber grating sensors, through the detection of grating wavelength changes to achieve the purpose of monitoring temperature, strain, pressure and other physical quantities. The wavelength range is from 1525nm to 1565nm, and the wavelength, light intensity and spectral data of the grating to be measured can be reported to the host computer through the serial port RS232.

FBG Fiber Optic Grating Demodulator4/8/16 channels selectable

This is a 1450/1550/1660nm Raman WDM coupler module for DTS Raman temperature measurement system, with one 1550nm input port and three output ports (1450nm and 1660nm to APD photodetector, COM port to sensing optical cable. This module makes DTS system integration more convenient.

1450/1550/1660nm Raman WDM coupler for DTS

The laser is customized for distributed fiber optic temperature measurement applications and features high stability, adjustable pulse width and high peak power output at 1550 nm with a minimum pulse width of 5 ns. It supports both ACC and APC mode operation.

Nanosecond Pulsed Laser for DTS Temperature Sensing 1550nm Power 30W

The PD610 is a photodetector with amplification circuitry for free-space optical systems. The unit includes a photodiode, transimpedance amplifier, and RF connector packaged in an aluminum housing.

PD610 Amplified Photodetector Free-Space PIN Photodiode

The PD12 is a photodetector with amplification circuitry for use with FC-connected fiber optic cables in optical systems. The device consists of a photodiode, transimpedance amplifier, and RF connector packaged in an aluminum housing.

PD12 Amplified Photodetector Fiber-coupled FC interface

APD20 series APD photodetector module, can detect near infrared light in the region of 400-1700nm with fiber coupling input, bandwidth from 10M to 400M. suitable for detecting nW level of optical power.

APD20 APD Amplified Photodetector Fiber-Coupled

APD430 series of free-space APD photodetector modules, wavelength range covering the visible and near-infrared region, can be used to replace Thorlabs the same model parameters; suitable for free-space optical applications detection, such as LIDAR.

APD430 Free-Space APD Photodetector vs Thorlabs

The APD12703 series photodetector uses a 3mm diameter large target APD photodetector with very high gain and UV enhancement at 355nm, very suitable for fluorescence detection and other scenarios.

300-1100nm UV-enhanced Silicon Avalanche Photodetector

APD210 photodetector module up to 1.8G bandwidth, while still having a very high gain (sensitivity), the module uses space optical input, suitable for scientific research field of space optical communication experiments, space optical laser detection and other scenarios.

APD210 APD photodetector for free space optical communication 1Ghz

they are widely used in coherent detection applications for distributed fiber optic sensing, and in scenarios such as wind measurement radar.

Balance Detector 10M-400MHz for OCT, Fiber Optic Sensing Systems, Wind Radar

High-Speed Ultra-fast Photodetector Modules 40GHz

One photodetector module with 4/8/16 channels, compact size, easy integration, customized parameters

Multi-channel photodetector module 4/8/16 ports Customizable

DET20 series bias photodetector for mW level optical power detection, using free space light input, the series of photodetectors without amplification circuit, with very low noise, the module using analog signal output.

Bias photodetector, free space light for mW level optical power detection

The DET30 bias photodetector is a compact, unamplified, fiber-optic input, battery-powered detector with very low noise, and can be used to detect optical signals with ps-level pulse widths.

DET30 bias photodetector ps-level pulse detection

1550nm Narrow Linewidth FMCW Tunable Laser Module with Ultra Low RIN Noise and Excellent FM Performance for Wide Range of FMCW Lidar Applications.

Narrow Linewidth Tunable Laser Module for FMCW Radar

1550nm fiber-coupled acousto-optic modulator for fiber optic sensing applications such as distributed fiber optic vibration sensing systems.

1550nm Fibre-Coupled Acousto-Optic Modulator 80Mhz

The photodiode material is silicon, and the response spectrum is 300-1100nm; UV enhancement at 355nm; with a large target surface of 3000um, it is very suitable for doing low light detection, fluorescence detection and other applications.

Ф3mm 300~1100nm silicon avalanche photodiode UV enhanced TO5-e