Embedded 8-channel Dynamic Signal Acquisition Card DAQ
The embedded all-in-one 8-channel dynamic signal acquisition unit integrates CPU, FPGA, and 24bits ADC on a single board with a very high degree of integration.
Huang
Email: Hqy@ybphotonics.com
Product Info
Introduction
High-performance K7 FPGA chip on board, connected to the CPU through the PCI Express 2.0 bus, which can realize fast real-time transmission of acquisition data, and the maximum sampling rate of the acquisition card is 204.8KSps.
Embedded integrated 8-channel dynamic signal acquisition unit integrates CPU, FPGA and 24bits ADC on a single board with high integration. The on-board high performance K7 FPGA chip is connected to the CPU via PCI Express 2.0 bus, which can realize the fast real-time transmission of the acquired data. Built-in IEPE 2mA current excitation source, which can be enabled or disabled by a dip switch. Support Windows, Centos, Ubuntu, LabVIEW RT and other operating systems. Suitable for edge computing, distributed data acquisition, fault diagnosis, machine condition monitoring and other application scenarios.
Specifications
CPU Unit
- ATOM E3845, 4 Core@1.91GHz
- 4GB DDR3-1333 memory
- mSATA2.0 interface, support mSATA SSD, 64GB~1TB
- 1-way Gigabit Ethernet interface
- 1 HDMI display interface
- 2-way USB2.0 interface
- 2 RS232 interface
- Support Windows, Centos, Ubuntu, LabVIEW RT operating system.
Signal Acquisition Unit
- Input channels: 8
- Signal connector: PH-2A or MMCX optional
- Coupling method: AC (DC coupling can be customized)
- Input voltage range: ±5V (other input ranges can be customized)
- ADC resolution: 24bits
- Sampling rate: 204.8KSps (Max)
- Data cache per channel: 16K Samples
- IEPE Current Excitation: 2mA, DIP switch enable/disable
- Dynamic Range: 106dBFS
- THD+N (1KHz): -105dB
- AC coupling low end cutoff frequency (-3dB): 0.8Hz
Digital IO Unit
- 16 channels of digital IOs, each 8 IOs can be independently programmed as input/output
- IO level: 3.3V LVTTL (5V TTL can be customized)
Power supply and power consumption
- Power supply voltage: DC 12V power supply (optional 12-30V wide range power supply)
- Power consumption: 13W (Max)
Temperature range
- Operating temperature: 0~60℃ (optional -40~60℃)
- Storage temperature: -40~85°C
Mechanical Dimensions
- 145mm(L) x 100mm(W) x 30mm(H)
High-performance K7 FPGA chip on board, connected to the CPU through the PCI Express 2.0 bus, which can realize fast real-time transmission of acquisition data, and the maximum sampling rate of the acquisition card is 204.8KSps.
Embedded integrated 8-channel dynamic signal acquisition unit integrates CPU, FPGA and 24bits ADC on a single board with high integration. The on-board high performance K7 FPGA chip is connected to the CPU via PCI Express 2.0 bus, which can realize the fast real-time transmission of the acquired data. Built-in IEPE 2mA current excitation source, which can be enabled or disabled by a dip switch. Support Windows, Centos, Ubuntu, LabVIEW RT and other operating systems. Suitable for edge computing, distributed data acquisition, fault diagnosis, machine condition monitoring and other application scenarios.
Specifications
CPU Unit
- ATOM E3845, 4 Core@1.91GHz
- 4GB DDR3-1333 memory
- mSATA2.0 interface, support mSATA SSD, 64GB~1TB
- 1-way Gigabit Ethernet interface
- 1 HDMI display interface
- 2-way USB2.0 interface
- 2 RS232 interface
- Support Windows, Centos, Ubuntu, LabVIEW RT operating system.
Signal Acquisition Unit
- Input channels: 8
- Signal connector: PH-2A or MMCX optional
- Coupling method: AC (DC coupling can be customized)
- Input voltage range: ±5V (other input ranges can be customized)
- ADC resolution: 24bits
- Sampling rate: 204.8KSps (Max)
- Data cache per channel: 16K Samples
- IEPE Current Excitation: 2mA, DIP switch enable/disable
- Dynamic Range: 106dBFS
- THD+N (1KHz): -105dB
- AC coupling low end cutoff frequency (-3dB): 0.8Hz
Digital IO Unit
- 16 channels of digital IOs, each 8 IOs can be independently programmed as input/output
- IO level: 3.3V LVTTL (5V TTL can be customized)
Power supply and power consumption
- Power supply voltage: DC 12V power supply (optional 12-30V wide range power supply)
- Power consumption: 13W (Max)
Temperature range
- Operating temperature: 0~60℃ (optional -40~60℃)
- Storage temperature: -40~85°C
Mechanical Dimensions
- 145mm(L) x 100mm(W) x 30mm(H)
