Si related photodetectors and fiber optic sensing products - page 25
Si related products
DTS Integrated Optical Path Module
[DTS] 2026-07-28 06:06:53
Integrated Polarization-Maintaining Acousto-Optic Modulator （AOM+Drive）80M/200M
[AOM] 2026-07-29 01:07:11
The integrated optical fiber acousto-optic modulator is a product that integrates acousto-optic modulator and acousto-optic driver. Compared with split products, it has a more compact package, smaller volume, and stable performance, which is more convenient for application in optical systems.
GY-DAQ-2510DA Dual-Channel High-Speed DAS Demodulation Card
[DAQ] 2026-07-29 04:05:46
Si related articles
Data acquisition system for fiber optic vibration monitoring
From the schematic diagram we can see that the distributed fiber optic vibration data monitoring system, using a balanced photodetector for coherent detection, and then need to IQ demodulation of the collected data, demodulation followed by phase unwinding to obtain the amplitude root phase data information.
How to configure a pulsed laser for DTS temperature sensing
Introduces the configuration of the pulsed laser for DTS temperature sensing, including how to set the ACC and APC modes, the trigger method and the pulse width parameters.
What are DVS, DTS, DAS, FBG in fiber optic sensing
What are the DVS, DTS, DAS, FBG of fiber optic sensing, what are their technical features, and what are their main uses.
Fiber Optic Intrusion Detection System Video
The fiber optic perimeter intrusion monitoring system realizes fiber optic vibration sensing and monitoring based on the basic principle of Rayleigh scattering, combined with φ-OTDR (Phase Sensitive Optical Time Domain Reflection) technology and signal analysis and processing algorithms.
Raman amplifiers in distributed fiber optic acoustic sensing systems Video
Raman amplifier solves the problem of low signal-to-noise ratio in distributed fiber optic acoustic sensing DAS systems
Testing of a distributed fiber optic acoustic sensing system at a 50KM location
The PZT was used to test the Distributed Fiber Optic Acoustic Sensing System DAS at a location of 50KM, using a repetition frequency of 2000Hz, capable of testing signals at 980Hz.
Distributed fiber optic acoustic sensing system tests different vibrations with PZT and restores the signals.
Video of a test of the effect of a DAS-reduced signal using a PZT to generate vibrations of different frequencies for excitation of an optical fiber.
Fiber Optic Sensing Explained: How DVS (Amplitude) and DAS (Phase) Work, Differences, and Use Cases
Fiber Optic Sensing Explained: How DVS (Amplitude) and DAS (Phase) Work, Differences, and Use Cases
The AI-based DAS integrated system classifies signals from excavation and vehicle passage events
The AI-based DAS integrated system classifies signals from excavation and vehicle passage events.
Highly sensitive DAS systems reproduce sound using armored optical cables
Highly sensitive DAS systems reproduce sound using armored optical cables.
Distributed Acoustic Sensing (DAS) collects sample data for AI model training
Distributed Acoustic Sensing (DAS) collects sample data for AI model training.
GY-DAQ-2480-E Fiber Optic Acoustic Sensing (DAS) Data Acquisition Card User Guide
1. Unboxing and inspection
2. Connecting Ethernet cables/fiber ports
3. Configuring IP addresses
4. Testing
Data Acquisition Card Product Selection Chart
Data Acquisition Card Product Selection Chart
DAS Acquisition Card | How Is It Different from Traditional Acquisition Cards?
DAS Acquisition Card | How Is It Different from Traditional Acquisition Cards?
Installation Guide for PCIe DAS Acquisition Cards
Installation Guide for PCIe DAS Data Acquisition Cards, Compatible Models: GY-DAQ-2480, GY-DAQ-2510D, GY-DAQA-2510.
Should I choose a 250 MHz or 1 GHz data acquisition card for a DAS system?
Should I choose a 250 MHz or 1 GHz data acquisition card for a DAS system?
Data acquisition card for distributed fiber optic vibration monitoring system
Introduction of data acquisition card for distributed fiber optic vibration monitoring system, 100M sampling rate, PCIe interface with demodulation algorithm.
FAQ for the GY-DAQA-2510 High-Speed DAS Acquisition Card
FAQ for the GY-DAQA-2510 High-Speed DAS Acquisition Card
DAS Acquisition Card (GY-DAQ-2480-E) Product Overview
DAS Acquisition Card (GY-DAQ-2480-E) Product Overview
DAS Data Acquisition Card Driver Installation Guide
This tutorial provides detailed instructions for installing the GY-DAQ-2480 driver.
Ethernet Port Data Acquisition Card Installation Guide
Installation Guide for Ethernet Port Data Acquisition Cards, compatible with models GY-DAQ-2480-E, DVS-ETH-100-1, and DTS-ETH-250M-2A.
GY-DAQ-2480 Data Analysis and Sample Code for Capture Cards (Python)
Flowchart for Analyzing Capture Card Data and Sample Code (Python)
Sample code for the DAS acquisition card (GY-DAQ-2480-E)
Sample code for the DAS acquisition card (GY-DAQ-2480-E)
Data Acquisition Card Product Specifications
Data Acquisition Card Product Specifications
Wiring Diagram for the Acquisition Card
Wiring Diagram for the Acquisition Card
Data Acquisition Card Documentation Downloads
Data Acquisition Card Documentation Downloads
Distributed Fiber Optic Sensing System
distributed fiber optic sensing systems have been widely used in various fields. Distributed fiber optic sensing system uses optical fiber as a sensing element, thus realizing distributed measurement of physical quantities.
What is the maximum distance of distributed fiber optic vibration sensing?
How long can a distributed fiber optic vibration sensing system monitor? In the laboratory it can support 80km, in the application site to consider the light decay and other reasons, the maximum available 60km.
What type of fiber is used for distributed fiber optic vibration sensing?
The type of fiber used for distributed fiber optic vibration sensing is single-mode G652, which is a very common fiber, all in our communication fiber optic cable, and is not expensive.
Component Configuration of a Distributed Fiber Optic Acoustic Sensing DAS
Distributed fiber optic acoustic sensing system DAS configuration of 2 ways, one is 80M AOM + 250M DAQ, the other is 200M AOM + 1G DAQ
Common Anomalous Signals in Distributed Acoustic Sensing (DAS) Systems and Their Handling
Common Anomalous Signals in Distributed Acoustic Sensing (DAS) Systems and Their Handling
How can the optical path of a distributed fiber optic temperature sensing (DTS) system be integrated into a single enclosure?
With our in-house developed DTS, there’s no need for separate optical paths anymore! The GY-DTS-M integrated module helps manufacturers and integrators significantly shorten development cycles.
Si fiber-coupled photodetector selection table Wavelength range 400-1100nm
List of fiber-coupled silicon photodetectors, wavelength 400-1100nm easy to quickly find the right product model.
Free-Space Si PIN APD detector, TO package for spatial light detection in visible light
Free-space silicon photodetector with response wavelength 400-1100 nm, including PIN amplification, APD and bias detector