DTS related photodetectors and fiber optic sensing products
DTS related products
DAQ for Raman DTS with Ethernet interface 250MSps pulse-triggered output
[DAQ] 2023-06-07 22:48:27
The GY-DTS-X is a special DAQ card for DTS system，With 100/200/250MSps sampling rate. It adopts 100Mbps network port for data transmission，Built-in averaging function with a high signal-to-noise ratio. the maximum number of averaging can be up to 65536 times.
Distributed Fiber Optic Temperature Measurement Mainframe
[DTS] 2023-08-26 02:25:41
Dual Port APD Receiver Module For Raman DTS
[Avalanche Photodetector] 2023-11-25 06:40:34
The APD modules are based on low-noise avalanche photodiodes made of InGaAs with a built-in pre-amplifier and high voltage supply.A temperature compensation function allows the APD to be operated at constant gain across a wide operating temperature range.
Nanosecond Pulsed Laser for DTS Temperature Sensing 1550nm Power 30W
[Laser Module] 2024-02-17 02:47:09
The laser is customized for distributed fiber optic temperature measurement applications and features high stability, adjustable pulse width and high peak power output at 1550 nm with a minimum pulse width of 5 ns. It supports both ACC and APC mode operation.
1450/1550/1660nm Raman WDM coupler for DTS
[WDM] 2023-10-01 03:41:23
This is a 1450/1550/1660nm Raman WDM coupler module for DTS Raman temperature measurement system, with one 1550nm input port and three output ports (1450nm and 1660nm to APD photodetector, COM port to sensing optical cable.
This module makes DTS system integration more convenient.
DTS related articles
How to configure a pulsed laser for DTS temperature sensing
Introduces the configuration of the pulsed laser for DTS temperature sensing, including how to set the ACC and APC modes, the trigger method and the pulse width parameters.
What are DVS, DTS, DAS, FBG in fiber optic sensing
What are the DVS, DTS, DAS, FBG of fiber optic sensing, what are their technical features, and what are their main uses.
DTS Nanosecond Laser Reliability Testing
DTS Nanosecond Laser Product Reliability Test Report，Performs high and low temperature, vibration, and tensile tests.
Introduction to the Principles and Components of Distributed Fiber Optic Temperature Measurement Systems (DTS)
The video introduces the principles of a distributed fiber optic Raman temperature measurement system and the components needed to make up the system.