temperature related photodetectors and fiber optic sensing products - page 8
temperature related products
Acousto-Optic Modulator 1550nm Frequency 200Mhz Rise Time 10ns
[AOM] 2023-08-15 00:34:54
The G-1550-200-L-D-T-AA-G3-T-L is 1550nm fiber-coupled acousto-optic modulator(AOM), Frequency 200Mhz, deal for fiber optic sensing system applications.
1064nm APD avalanche detector for lidar, atmospheric aerosol detection
[Avalanche Photodetector] 2026-03-18 09:26:52
The detector is based on a silicon-based avalanche photodiode with 1064 nm enhanced response and high gain response for atmospheric aerosol radar
ASE Broadband Light Source
[Laser Module] 2023-05-27 13:27:17
ASE Broadband Light Source, C-band 1528-1563nm, 20mW/50mW.
Linear Power Supply ±12VDC Vpp 5mV 200mA
[Multi-channel Photodetector] 2026-03-18 10:02:05
PN12 high precision regulated linear power supply ±12VDC, voltage ripple Vpp 5mV, suitable for powering photodetectors and other precision instruments.
PDA60A2 Si Free Space Photodetector 6x6mm 320-1100nm 10MHz
[Amplified Photodetector] 2026-03-18 09:28:49
PDA60A2 photodetector based on 6x6mm large size target surface photodiode, response wavelength 320-1100nm, bandwidth DC-10MHz, With amplifier circuit with 10^3 gain.
temperature related articles
How to configure a pulsed laser for DTS temperature sensing
Introduces the configuration of the pulsed laser for DTS temperature sensing, including how to set the ACC and APC modes, the trigger method and the pulse width parameters.
BOM table of distributed fiber optic temperature measurement system
DTS fiber optic temperature measurement system BOM table, convenient for users to develop their own DTS temperature measurement system
Introduction to the Principles and Components of Distributed Fiber Optic Temperature Measurement Systems (DTS)
The video introduces the principles of a distributed fiber optic Raman temperature measurement system and the components needed to make up the system.
How to Set Temperature Thresholds on a Distributed Fiber Optic (DTS) Monitoring System
Follow this step-by-step guide to accurately set temperature thresholds on your Distributed Fiber Optic (DTS) monitoring system. Learn expert tips to minimize false alarms and maximize cable safety.
How can the optical path of a distributed fiber optic temperature sensing (DTS) system be integrated into a single enclosure?
With our in-house developed DTS, there’s no need for separate optical paths anymore! The GY-DTS-M integrated module helps manufacturers and integrators significantly shorten development cycles.