temperature related photodetectors and fiber optic sensing products - page 2
temperature related products
250MSps DAQ Board for Raman DTS Gigabit Ethernet port UDP protocol
[DAQ] 2025-05-19 04:37:51
DTS-ETH-250M-2 is a special data acquisition card for DTS of distributed fiber optic temperature measurement system, which adopts Gigabit Ethernet port for data transmission and built-in averaging function with very high signal-to-noise ratio. Each channel supports a maximum of 32768 points acquisition, averaging up to 65536 times, 250M sampling rate, spatial resolution of 0.4 meters.
1GSps dual-channel high-speed data acquisition card
[DAQ] 2025-04-03 01:59:35
The DAQ board, which can be set up to 1G sample rate and has built-in trigger output and input interfaces, can be used for applications such as DAS distributed acoustic sensing system with 200M AOM acquisition or LIDAR.
100MSps high speed DAQ card for DVS
[DAQ] 2025-04-03 13:43:15
This is a data acquisition card for distributed fiber optic vibration monitoring system (DVS) with built-in TTL pulse signal trigger output function to provide signal to the AOM driver, saving extra signal generator (AWG) and reducing the integration difficulty and complexity of the system.
Enhanced DAS hardware all-in-one TCP protocol direct vibration signal output
[DVS Module] 2025-08-05 00:17:30
Enhanced DAS all-in-one is capable of real-time demodulation of the phase of the entire fiber optic cable, TCP protocol output of vibration signals, and coherent attenuation suppression, enabling the output of purer signals than general-purpose DAS all-in-one.
Universal DAS Hardware All-in-One
[DVS Module] 2025-08-04 23:49:41
temperature related articles
How to configure a pulsed laser for DTS temperature sensing
Introduces the configuration of the pulsed laser for DTS temperature sensing, including how to set the ACC and APC modes, the trigger method and the pulse width parameters.
BOM table of distributed fiber optic temperature measurement system
DTS fiber optic temperature measurement system BOM table, convenient for users to develop their own DTS temperature measurement system
Introduction to the Principles and Components of Distributed Fiber Optic Temperature Measurement Systems (DTS)
The video introduces the principles of a distributed fiber optic Raman temperature measurement system and the components needed to make up the system.