temperature related photodetectors and fiber optic sensing products - page 10
temperature related products
InGaAs APD Photodiodes Φ200μm 950-1700nm TO-CAN
[InGaAs APD Photodiodes] 2024-01-21 03:04:11
InGaAs APD avalanche photodetector, wavelength: 950-1700nm; diameter Φ 200μm, used for distance measurement, spatial light transmission, LIDAR, low light detection, available in bare chip, TO-CAN, pigtail, flange and other packaging forms.
InGaAs Avalanche Photodiode 500um APD Chip
[InGaAs APD Photodiodes] 2024-01-21 03:03:35
This is a 500um diameter InGaAs APD photodetector, the wavelength range is 950-1700nm, Respondsivity at 1550nm is 0.9A/W, bandwidth 450MHz, we can provide die, but also according to customer packaging requirements for chip packaging, such as (TO package, pigtail package, etc.)
1550nm ultra-narrow linewidth single frequency laser ≤2kHz
[Laser Module] 2024-08-12 23:12:31
The center wavelength 1550nm ultra-narrow line width single frequency laser is a combination of silicon photonic chip technology, ECL laser technology and advanced packaging technology into a high-performance semiconductor laser products.
1550nm Butterfly SOA 14PIN
[EDFA] 2023-07-02 23:39:33
The series of products are based on the standard packaging platform of the Institute of Optoelectronic Integrated Microsystems, Tsinghua University, and use sealed inorganic butterfly device packaging technology
1550nm Narrow Linewidth Semiconductor Laser 100kHz 70mW DFB Butterfly Package
[Laser Module] 2024-01-14 09:03:15
Ultra-narrow linewidth (≤100 kHz), single-frequency center wavelength 1550nm, supports any wavelength customization in C-band, 14Pin butterfly package.
temperature related articles
How to configure a pulsed laser for DTS temperature sensing
Introduces the configuration of the pulsed laser for DTS temperature sensing, including how to set the ACC and APC modes, the trigger method and the pulse width parameters.
BOM table of distributed fiber optic temperature measurement system
DTS fiber optic temperature measurement system BOM table, convenient for users to develop their own DTS temperature measurement system
Introduction to the Principles and Components of Distributed Fiber Optic Temperature Measurement Systems (DTS)
The video introduces the principles of a distributed fiber optic Raman temperature measurement system and the components needed to make up the system.
How to Set Temperature Thresholds on a Distributed Fiber Optic (DTS) Monitoring System
Follow this step-by-step guide to accurately set temperature thresholds on your Distributed Fiber Optic (DTS) monitoring system. Learn expert tips to minimize false alarms and maximize cable safety.
How can the optical path of a distributed fiber optic temperature sensing (DTS) system be integrated into a single enclosure?
With our in-house developed DTS, there’s no need for separate optical paths anymore! The GY-DTS-M integrated module helps manufacturers and integrators significantly shorten development cycles.