Data Acquisition Card for Distributed Acoustic Fiber Sensing (DAS) with Pulse Output sends TTL pulses directly to the AOM driver, eliminating the need for an additional pulse generator and greatly reducing system complexity.
GY-DAQA-2510 is a high-performance DAS dedicated data acquisition card, with dual-channel 1GSps synchronous trigger sampling, and comes with AWG function, which can generate 2-channel swept signal output for chirp pulse modulation.
The UNL-C-F-M-C34-13-7-1-0-0 is a narrow linewidth 1550nm laser module from YB Photonics. It features an ultra-narrow linewidth (<3kHz) making it ideal for distributed fiber optic sensing systems(DVS/DAS) and wind radar.
DTS-ETH-250M-2 is a special data acquisition card for DTS of distributed fiber optic temperature measurement system, which adopts Gigabit Ethernet port for data transmission and built-in averaging function with very high signal-to-noise ratio. Each channel supports a maximum of 32768 points acquisition, averaging up to 65536 times, 250M sampling rate, spatial resolution of 0.4 meters.
We offer 1064nm detector photodiodes, bare, packaged on request; we also offer 1064nm photodetector modules for research experiments or LIDAR applications.
What type of photodetector is used for LIDAR depends on the detection scheme of the LIDAR, if the LIDAR is based on the TOF principle, the APD type of photodetector is selected, if the LIDAR is based on the FMCW principle, the BPD balanced photodetector is selected.
The fiber optic perimeter intrusion monitoring system realizes fiber optic vibration sensing and monitoring based on the basic principle of Rayleigh scattering, combined with φ-OTDR (Phase Sensitive Optical Time Domain Reflection) technology and signal analysis and processing algorithms.
Coherent Detection Module for Distributed Fiber Optic Vibration/Sound Detection (DVS/DAS) and Wind Radar.It is characterized by high signal-to-noise ratio, high reliability and easy integration.
YB Photonics VS Thorlabs quick selection table, use this table to quickly find replaceable models. The table lists the correspondence between amplified detectors, APDs, bias detectors, balanced detectors, etc.