TEC related photodetectors and fiber optic sensing products - page 6

[Amplified Photodetector] 2023-10-04 15:07:14

PDA60A2 photodetector based on 6x6mm large size target surface photodiode, response wavelength 320-1100nm, bandwidth DC-10MHz, With amplifier circuit with 10^3 gain.

[EDFA] 2023-11-04 23:53:50

The module integrates both an EDFA erbium-doped fiber amplifier and a Raman fiber amplifier inside the module, which significantly reduces system complexity, increases reliability, and reduces size compared to conventional EDFA and Raman amplification systems. The front-end EDFA is available as a pulsed EDFA or an amplified EDFA suitable for ultra-long-range fiber optic sensing systems or high-speed fiber optic communication systems.

[Photodiodes] 2025-02-26 03:42:12

This is DC-40G analog photodetector, Small size package, High responsivity: typical 0.75 mA/mW@ 1550nm, for antenna remote control, satellite communication, distributed antenna system, high speed test and measurement, Video Signal Distribution in HFC and FTTx Nodes, Wireless signal transport and other applications.

[InGaAs APD Photodiodes] 2024-01-21 03:04:11

InGaAs APD avalanche photodetector, wavelength: 950-1700nm; diameter Φ 200μm, used for distance measurement, spatial light transmission, LIDAR, low light detection, available in bare chip, TO-CAN, pigtail, flange and other packaging forms.

[InGaAs APD Photodiodes] 2024-01-21 03:03:35

This is a 500um diameter InGaAs APD photodetector, the wavelength range is 950-1700nm, Respondsivity at 1550nm is 0.9A/W, bandwidth 450MHz, we can provide die, but also according to customer packaging requirements for chip packaging, such as (TO package, pigtail package, etc.)

We offer 1064nm detector photodiodes, bare, packaged on request; we also offer 1064nm photodetector modules for research experiments or LIDAR applications.

What type of photodetector is used for LIDAR depends on the detection scheme of the LIDAR, if the LIDAR is based on the TOF principle, the APD type of photodetector is selected, if the LIDAR is based on the FMCW principle, the BPD balanced photodetector is selected.

determine these core parameters, Wavelength of light,input mode of light, bandwidth, power.

The fiber optic perimeter intrusion monitoring system realizes fiber optic vibration sensing and monitoring based on the basic principle of Rayleigh scattering, combined with φ-OTDR (Phase Sensitive Optical Time Domain Reflection) technology and signal analysis and processing algorithms.

Video presentation explaining what the bandwidth of a photodetector is and how to select the right DAQ for a photodetector system

Coherent Detection Module for Distributed Fiber Optic Vibration/Sound Detection (DVS/DAS) and Wind Radar.It is characterized by high signal-to-noise ratio, high reliability and easy integration.

Some parameters you need to prepare before choosing a photodetector module, so you can find the right photodetector more quickly.

YB Photonics VS Thorlabs quick selection table, use this table to quickly find replaceable models. The table lists the correspondence between amplified detectors, APDs, bias detectors, balanced detectors, etc.

What is the difference between a photodiode and photodetector.

List of fiber-coupled silicon photodetectors, wavelength 400-1100nm easy to quickly find the right product model.

Free-space silicon photodetector with response wavelength 400-1100 nm, including PIN amplification, APD and bias detector

What are the photodetectors with 800-1700nm fiber coupling input and quick selection.

InGaAs Free Space Photodetector 800-1700nm Quick selection table to quickly find the right detector for your application.