DVS related photodetectors and fiber optic sensing products - page 2

[AOM] 2024-07-03 11:43:02

1550nm fiber-coupled acousto-optic modulator for fiber optic sensing applications such as distributed fiber optic vibration sensing systems.

[AOM] 2023-08-15 00:34:54

The G-1550-200-L-D-T-AA-G3-T-L is 1550nm fiber-coupled acousto-optic modulator(AOM), Frequency 200Mhz, deal for fiber optic sensing system applications.

[EDFA] 2024-01-14 09:12:58

Pulsed EDFA erbium-doped fiber amplifier, C-band, commonly used after the acousto-optic modulator to achieve the amplification of pulsed optical signals, common in distributed fiber optic sensing systems, LIDAR and other applications.

[EDFA] 2023-11-04 23:53:50

The module integrates both an EDFA erbium-doped fiber amplifier and a Raman fiber amplifier inside the module, which significantly reduces system complexity, increases reliability, and reduces size compared to conventional EDFA and Raman amplification systems. The front-end EDFA is available as a pulsed EDFA or an amplified EDFA suitable for ultra-long-range fiber optic sensing systems or high-speed fiber optic communication systems.

[EDFA] 2024-10-28 13:09:50

Raman amplifier modules can be used in distributed fiber optic vibration systems, capable of increasing fiber optic sensing distances up to 40km or more.

What are the DVS, DTS, DAS, FBG of fiber optic sensing, what are their technical features, and what are their main uses.

DVS-A series DVS all-in-one integrated module each channel can support 40km. data output for 2-way Gigabit network port, built-in fiber optic sensing demodulation algorithm.

Fiber Optic Sensing Explained: How DVS (Amplitude) and DAS (Phase) Work, Differences, and Use Cases

High-speed data acquisition card for DVS system，100MSps DAQ

What was the difference between DAS and DVS before. How easy it is to develop and how it compares in terms of sensitivity.

A tutorial on how to wire a distributed fiber optic vibration sensing system DVS/DAS, and notes related to the wiring process.

The software programming of DVS/DAS system is actually for the interface programming of data acquisition card, you can use C, C++, Python, labview, matlab, etc. for programming.

DVS/DAS system with ultra-narrow linewidth lasers, 1550nm 3k linewidth 20mW lasers are usually used in our system.