<
>
Pulsed EDFA Erbium-doped fiber amplifier Pulsed signal amplification C-band
Pulsed EDFA erbium-doped fiber amplifier, C-band, is commonly used after the acousto-optic modulator to achieve the amplification of pulsed optical signals.
Model：EDFA-P
Contact：
Huang
Email: Hqy@ybphotonics.com
Huang
Email: Hqy@ybphotonics.com
Product Info
Introduction
Pulsed EDFA erbium-doped fiber amplifier, C-band, commonly used after the acousto-optic modulator to achieve the amplification of pulsed optical signals, common in distributed fiber optic sensing systems, LIDAR and other applications.
High-speed pulsed EDFA erbium-doped fiber amplifier series is suitable for fiber optic sensing system, high-speed fiber optic communication and other applications
characterization
applications
Highly integrated
DAS/DVS High gain factor
Fiber Distributed Sensing
Low Noise Index
fiber laser
Erbium-doped fiber amplifier parameters
Optical indicators unit Type Value Note wavelength range nm 1550 Minimum Input Power dBm -53 Gain dB 12 noise index
dB 5.0 Bias Correlation Gain
dB <0.3 polarization mode dispersion ps 0.5 Input/Output Isolation dB >35 Pigtail and connector types - SMF-28，FC/APC operating mode - /
Module parameters Power/communication interface 3.81 Pitch 5P Connector power supply 5VDC/3A communications protocol Modbus RTU slave
Dimensions (without connectors) 120x90x26 (mm) Operating Temperature Range -10~+55 ℃ Operating humidity range 0~90%
Management Software
Pulsed EDFA erbium-doped fiber amplifier, C-band, commonly used after the acousto-optic modulator to achieve the amplification of pulsed optical signals, common in distributed fiber optic sensing systems, LIDAR and other applications.
High-speed pulsed EDFA erbium-doped fiber amplifier series is suitable for fiber optic sensing system, high-speed fiber optic communication and other applications
| characterization | applications |
|---|---|
| Highly integrated | DAS/DVS |
| High gain factor | Fiber Distributed Sensing |
| Low Noise Index | fiber laser |
| Erbium-doped fiber amplifier parameters | |||
|---|---|---|---|
| Optical indicators | unit | Type Value | Note |
| wavelength range | nm | 1550 | |
| Minimum Input Power | dBm | -53 | |
| Gain | dB | 12 | |
| noise index | dB | 5.0 | |
| Bias Correlation Gain | dB | <0.3 | |
| polarization mode dispersion | ps | 0.5 | |
| Input/Output Isolation | dB | >35 | |
| Pigtail and connector types | - | SMF-28，FC/APC | |
| operating mode | - | / |
| Module parameters | |
|---|---|
| Power/communication interface | 3.81 Pitch 5P Connector |
| power supply | 5VDC/3A |
| communications protocol | Modbus RTU slave |
| Dimensions (without connectors) | 120x90x26 (mm) |
| Operating Temperature Range | -10~+55 ℃ |
| Operating humidity range | 0~90% |
Management Software
Product Inquiry
Leading manufacturer of photodetector modules and fiber optic sensing system modules
