• Home
  • Products
  • Products tagged with Distributed Fiber Optic Vibration

Products tagged with Distributed Fiber Optic Vibration

Distributed Fiber Optic Vibration related contents

Cost-Effective DAQ Boards For Distributed Acoustic Sensor DAS
[DAQ] 2025-12-19 08:16:30
Data Acquisition Card for Distributed Acoustic Fiber Sensing (DAS) with Pulse Output sends TTL pulses directly to the AOM driver, eliminating the need for an additional pulse generator and greatly reducing system complexity.
1550nm Fibre-Coupled Acousto-Optic Modulator 80Mhz
[AOM] 2024-07-03 11:43:02
1550nm fiber-coupled acousto-optic modulator for fiber optic sensing applications such as distributed fiber optic vibration sensing systems.
Acousto-Optic Modulator 1550nm Frequency 200Mhz Rise Time 10ns
[AOM] 2023-08-15 00:34:54
The G-1550-200-L-D-T-AA-G3-T-L is 1550nm fiber-coupled acousto-optic modulator(AOM), Frequency 200Mhz, deal for fiber optic sensing system applications.

Related articles

What scenarios are distributed fiber optic vibration systems used in?
What scenarios are distributed fiber optic vibration systems(DVS/DAS) used in?
Data acquisition card for distributed fiber optic vibration monitoring system
Introduction of data acquisition card for distributed fiber optic vibration monitoring system, 100M sampling rate, PCIe interface with demodulation algorithm.
Distributed Fiber Optic Vibration System Integration Module Upgrade
The newly released DVS integrated module supports dual channels and is tested at temperatures from -20 to 60 degrees with stable performance.
YB-DAS-250-DAQ Distributed Fiber Optic Vibration Data Acquisition Card Description
YB-DAS-250-DAQ Distributed Fiber Optic Vibration Data Acquisition Card Description of how long the fiber optic length can be supported
What is the maximum distance of distributed fiber optic vibration sensing?
How long can a distributed fiber optic vibration sensing system monitor? In the laboratory it can support 80km, in the application site to consider the light decay and other reasons, the maximum available 60km.
What is the spatial resolution of the distributed fiber optic vibration monitoring system?
The spatial resolution is related to your optical pulse parameter setting, which is set according to the monitoring length of the fiber optic cable. 40km distance we can achieve 5m spatial resolution.
What type of fiber is used for distributed fiber optic vibration sensing?
The type of fiber used for distributed fiber optic vibration sensing is single-mode G652, which is a very common fiber, all in our communication fiber optic cable, and is not expensive.
How to demodulate data from a distributed fiber optic vibration system
The format of the raw data collected by a distributed fiber optic vibration system (DVS) and how to demodulate it.
Coherent Detection Module for Distributed Fiber Optic Vibration
Coherent Detection Module for Distributed Fiber Optic Vibration/Sound Detection (DVS/DAS) and Wind Radar.It is characterized by high signal-to-noise ratio, high reliability and easy integration.