pulsed related photodetectors and fiber optic sensing products
pulsed related products
250MSps DAQ Board for Raman DTS Gigabit Ethernet port UDP protocol
[DAQ] 2025-05-19 04:37:51
DTS-ETH-250M-2 is a special data acquisition card for DTS of distributed fiber optic temperature measurement system, which adopts Gigabit Ethernet port for data transmission and built-in averaging function with very high signal-to-noise ratio. Each channel supports a maximum of 32768 points acquisition, averaging up to 65536 times, 250M sampling rate, spatial resolution of 0.4 meters.
DVS/DAS Integrated Optical Module
[DVS Module] 2025-04-03 00:33:46
YB Photonics’s DVS/DAS integrated optical module highly integrates inside our own proprietary ultra-narrow linewidth laser, pulsed EDFA, Raman amplifier, AOM and other optical components in single compact package.
Distributed Fiber Optic Acoustic Sensing (DAS) Integration Module
[DVS Module] 2025-03-31 06:47:42
The distributed fiber optic DAS integrated module has a high performance 3k narrow linewidth laser, AOM acousto-optic modulator, EDFA amplifier and other devices integrated inside, with coherent detection optical path and very sensitive technical features.Easy OEM for customers.
Dual Port APD Receiver Module For Raman DTS
[Avalanche Photodetector] 2025-05-16 23:23:49
The APD modules are based on low-noise avalanche photodiodes made of InGaAs with a built-in pre-amplifier and high voltage supply.A temperature compensation function allows the APD to be operated at constant gain across a wide operating temperature range.
Nanosecond Pulsed Laser for DTS Temperature Sensing 1550nm Power 30W
[Laser Module] 2025-04-23 12:31:31
The laser is customized for distributed fiber optic temperature measurement applications and features high stability, adjustable pulse width and high peak power output at 1550 nm with a minimum pulse width of 5 ns. It supports both ACC and APC mode operation.
pulsed related articles
How to configure a pulsed laser for DTS temperature sensing
Introduces the configuration of the pulsed laser for DTS temperature sensing, including how to set the ACC and APC modes, the trigger method and the pulse width parameters.