InGaAs related photodetectors and fiber optic sensing products
InGaAs related products
250MSps DAQ Board for Raman DTS Gigabit Ethernet port UDP protocol
[DAQ] 2025-05-19 04:37:51
DTS-ETH-250M-2 is a special data acquisition card for DTS of distributed fiber optic temperature measurement system, which adopts Gigabit Ethernet port for data transmission and built-in averaging function with very high signal-to-noise ratio. Each channel supports a maximum of 32768 points acquisition, averaging up to 65536 times, 250M sampling rate, spatial resolution of 0.4 meters.
Dual Port APD Receiver Module For Raman DTS
[Avalanche Photodetector] 2025-05-16 23:23:49
The APD modules are based on low-noise avalanche photodiodes made of InGaAs with a built-in pre-amplifier and high voltage supply.A temperature compensation function allows the APD to be operated at constant gain across a wide operating temperature range.
Nanosecond Pulsed Laser for DTS Temperature Sensing 1550nm Power 30W
[Laser Module] 2025-04-23 12:31:31
The laser is customized for distributed fiber optic temperature measurement applications and features high stability, adjustable pulse width and high peak power output at 1550 nm with a minimum pulse width of 5 ns. It supports both ACC and APC mode operation.
PD610 Amplified Photodetector Free-Space PIN Photodiode
[Amplified Photodetector] 2025-03-04 02:13:21
The PD610 is a photodetector with amplification circuitry for free-space optical systems. The unit includes a photodiode, transimpedance amplifier, and RF connector packaged in an aluminum housing.
PD12 Amplified Photodetector Fiber-coupled FC interface
[Amplified Photodetector] 2023-11-01 12:12:44
The PD12 is a photodetector with amplification circuitry for use with FC-connected fiber optic cables in optical systems. The device consists of a photodiode, transimpedance amplifier, and RF connector packaged in an aluminum housing.
InGaAs related articles
InGaAs Free Space Photodetector 800-1700nm
InGaAs Free Space Photodetector 800-1700nm Quick selection table to quickly find the right detector for your application.